Specifications of polyethylene pipes

These pipes are mainly connected to other pipes by welding and screw connections. PE pipe size 16 is mostly designed and manufactured for greenhouse and agricultural needs. In addition, due to its small size, it will be very affordable for farmers and gardeners. Due to the small opening diameter of these pipes, the use of 16 mm polyethylene size is very suitable and durable for drip irrigation systems. Also, parts such as drippers are easily installed on these pipes for agricultural and garden activities.

PE pipe size 20 mm is made in different pressures. In fact, considering that this size of 20 mm polyethylene pipe is mostly used for irrigation of green spaces and greenhouses, the production policy of this size of pipes is based on pressures of 6 bar, 8 bar, 16 bar, 32 bar and up to 40 bar. As a result, the selection of the pressure type of the size 20 pipe will be based on the fluid pressure inside the pipe. This pipe size is also known in the market as single wall pipe.

25 mm plastic pipe, which is also known as 1 inch pipe, has several advantages. Important advantages such as:

🔸 ability to connect these size pipes with polyethylene connections
🔸 professional and strong sealing
🔸 high impact resistance
🔸 reasonable price
🔸 ability Use for water with low volume and pressure, as well as the possibility of long-term use of these pipes in agriculture, greenhouses and gardens, has made the 25 mm size polyethylene pipe to be significantly popular. As mentioned, PE pipe size 25 is used for fluids and water with low pressure and volume. Therefore, the production policy of these pipes is with working pressures of 10 bar and 16 bar. These pipes are produced in coils of 150 and 100 meters in the factory.

Polyethylene pipe size 32 mm, like size 25, is made in 150 and 100 meter coils. Also, due to the small opening diameter, size 32 pipe has wide applications for garden and agricultural purposes. Of course, sometimes depending on the type of need, they are used in production workshops. Mainly, the pipe sizes that are used for low flow volume and low water pressure are also produced with lower pressure. In this regard, 32 mm PE pipe is designed and manufactured at pressures of 6 bar, 10 bar, 16 bar and up to 32 bar.

40 mm size polyethylene pipe also has relatively common properties with 32, 25 and 20 mm sizes. In this way, it is used for water with low flow rate. Also, size 40 PE pipe is produced in 150 and 100 meter coils in the factory. And it can be made at pressures of at least 6 bar, 10, 16 and up to 32 bar. Piping in gardens and agricultural fields can be done using a 40 mm polyethylene pipe.

Like other small sizes of polyethylene pipe, 50 mm size pipe is mainly used for irrigation of gardens, greenhouses and agricultural fields. Due to relatively low flow rate, these pipes are produced at pressures of at least 5 bar and at most 32 bar. The selection of the pressure of these pipes is determined according to the "amount of transferred water volume" and "water pressure inside the pipe".

63 mm size polyethylene pipe can be considered as one of the most used PE pipes. Of course, the 63 mm size pipe is also very popular; Because it is produced in 6 meter branches and in addition to its excellent strength, it can be used for almost all needs. Of course, in terms of production, it is relatively similar to its other small-sized counterparts. That is, size 63 pipe is designed and manufactured at working pressures of 5, 10, 16 and up to 32 bar. Also, in the factories producing polymer products, these pipes are prepared in 150 and 100 meter coils.

Due to the major use of these pipes in irrigation, the 75 mm polyethylene pipe is designed and produced with lower pressures. In fact, the size 75 polyethylene pipe is made at working pressures of at least 5 bar to a maximum of 25 bar. This size of pipes is also made in coils of 150 and 100 meters and in branches of 6 meters. 75 mm size polyethylene equipment with the name of 3 inch pipe is also famous in the market.

The applications of the 90 mm polyethylene pipe are slightly different; Because in these pipes, it is possible to direct and transfer the fluid flow of water and gas. Although the 90 size pipe may not be suitable for transferring very high pressure gas flow; Because it is produced at minimum 5 bar, 10, 16 and maximum 25 bar pressures. The production size of this type of pipe is also the same as the previous ones.

PE pipe size 110 mm or the same 3 inch pipe is mostly used for conveying sewage in buildings. Therefore, it is also known as size 110 polyethylene sewage pipe. Due to the wide range of functions of this PE pipe size, various pressures and connections are used in the production of size 110. Of course, these differences are determined depending on the needs and differences of each project. For example: 110 mm size polyethylene pipe is used for conveying construction wastewater using butt welding. Another name for this type of welding is electrofusion. These pipes are made of PE80 raw materials and with pressures of 4 and 5 bar.
On the other hand, 110 mm PE pipe may be used for cable and high pressure needs. In this case, these equipments are produced at pressures of at least 6 bar and at most 32 bar. 110 mm high pressure plastic pipe is designed and manufactured in coiled and branched form. Its coiled type is produced in 100 meters.

Polyethylene pipe size 125 mm or 5 inches is produced in coiled and branched form. Depending on the type of project, this pipe size is made with different grade materials and at different pressures. Size 125 pipe may be made for water transfer, sewage and agricultural irrigation with PE8 and PE100 grades. In this case, it is produced at 4 and 5 bar pressures. It is also possible to produce the size 125 pipe in cable mode and high pressure (bearing 6 bar). In general, size 125 polyethylene pipe is designed and manufactured in the form of 50 meter coils and 6 to 12 meter branches in factories.

It is interesting to know that the 140 size pipe is one of the least used PE pipe sizes, so that even for this pipe size, special polyethylene fittings have not been produced. In fact, if there is a need to use a 140 mm pipe, pieces are cut from the pipes themselves. Then the joints are prepared manually, which usually do not have proper sealing. Size 140 polyethylene pipe is made at pressures of 6 to 25 bar. It is also available in 12 and 6 meter branches. Size 140 is usually used for piping to transport water with medium flow rate.

160 mm size polyethylene pipe can be considered as one of the most used sewer pipes. This size of pipes is also known as 6 inch PE pipe. 160 mm size is used to transfer sewage and medium flow water. Pipes that are produced with pressures of 5 to 25 atmospheres and in branches of 12 and 6 meters. 160 mm size plastic pipe is known as the largest water transfer pipe that is used in buildings. Also, if you have non-pressure water channels in your farmland, PE pipe size 160 with 5 bar pressure will be suitable.

Size 180 mm polyethylene pipe is not used much in industry and agriculture. The consumption of these pipes is so low that they are produced only at the request of the employer and customer. 180 pipe produced with PE63 grade with 4 bar pressure. Also, the production of the same size is done with PE80 grade and with a pressure of at least 5 to 25. This pipe size is made and sold with 6 and 12 meters.

200 mm diameter pipe is also known as 8 inch pipe. The best type of connection for 200 mm size pipes is connection with flange and ring. These pipes are intended for:

🔸 use in all kinds of irrigation systems and flood water transfer (as the main pipe)
🔸 directing the water of rivers and large reservoirs
🔸 piping of urban and rural water and sewage companies

225 mm or 9 inch polyethylene pipe is mostly used for two purposes; First, in order to transfer water with medium flow rate and second, for extensive water supply. 225 size pipe is produced in the form of 12 and 6 meter branches. They are also produced at pressures of at least 4 bar and at most 25 bar.

This type of pipe is also known as the 10-inch pipe and is undoubtedly one of the most used pipes for transporting liquids and sewage. The size 250 pipe has wide applications in order to transfer liquid fluids that are non-acidic and alkaline. This equipment is also produced and supplied in 12 and 6 meter branches. Also, 250 mm size polyethylene pipes are designed at pressures of at least 5 and at most 25 bar.

This size of polyethylene pipe is also not very popular and its production is done only by customer order. Because the use of 280 mm size pipe is definitely special and does not have normal and daily use. 280 mm PE pipe of Iran Pipe is designed and produced at pressures of 5 to 25 atmospheres. Also, like most PE pipe sizes, they will be made in two sizes of 6 and 12 meters (branched).

315 polyethylene pipes are one of the most demanded types of PE pipes. Also known as 12-inch pipe, this equipment is manufactured for sewage applications with a minimum pressure of 4 bar. Also, the production of 315 mm size for cable and high pressure applications and high flow water transfer applications is carried out under pressures of 5 to 25 bar.

This size of pipe is also very low consumption and is only produced at the request and order of customers. The production type is polyethylene pipe size 355 in branches of 6 and 12 meters. It is also produced under pressures of 5 to 25 bar. 355 mm size PE pipe is used to transfer liquid fluids.

400 mm size pipe has many demands from employers. The 400 mm size, which is also known as 16 inches, is widely used in high-flow water distribution networks. Also, size 400 polyethylene pipes have powerful functions for all types of urban water supply systems as well as sewage transfer. These types of pipes are produced under pressure of 6, 10 and 16 bar and are usually made of compressed plastic. This means that the surface of these pipes is much harder than other models.

This pipe also has the same properties as the 400 mm polyethylene pipe. with the difference that it can usually be produced in pressures of at least 5 and at most 25. In fact, the higher the water flow rate, the larger the size can be used. The size 450 or 18 inch pipe is made in the form of 12 and 6 meter branches.

This pipe size, depending on different projects, has a variety of production based on pressure; So that pressures of at least 4 bar, 5, 6, 10, 16 and 25 bar are produced for size 500. These pipes are produced with two commercial grades of PE80 and PE100 compressed plastic. Polyethylene pipes are one of the most popular pipes in terms of employers' demand. Some of the advantages of PE pipe size 500 mm are: 🔸 Tolerating high pressures as well as tolerating temperature changes (from -20 to +50 degrees Celsius)
🔸 Very strong and reliable in transferring current Fluids and wastewaters with high flow
Suitable performance for covering important mechanical facilities
Also, 500 mm size pipes are also available in 12 and 6 meter branches.

The properties of 560 mm (24 inch) polyethylene pipe are the same as most other pipes; That is, they are produced and supplied in 12 and 6 meter branches. These pipes are produced at pressures of 5 to 25 atmospheres and are used to transfer and direct the flow of liquid fluids (non-alkaline and acidic). Polyethylene pipe is undoubtedly one of the most attractive and efficient industrial equipments produced from polyethylene polymer material (PE). Polyethylene pipes are among the most popular industrial pipes due to their wide features such as resistance to acid and corrosive substances, resistance to chemical reactions, mechanical strength, anti-wear and proper weight.